Kit Reversal ULF

Manual

This inversion chemistry allows you to obtain excellent results with all photographic films on the market. Operating on a trays or tank with a temperature ranging from 20 ‍°C to 38 °C. The kit is complete with all the steps necessary for the complete treatment of the photosensitive material: 1) FIRST DEVELOPER Super-energetic is designed specifically to return the best sharpness and tonal range possible from a photographic support, reduces the grain size and increases the sharpness of the image. 2) STOP Odorless, safe to handle and stable over time. 3) BLEACH With hardener allows to treat the films and papers with greater safety with less risk of defects. 4) BLEACH CLEANER To shorten to a few seconds the time needed in the process and save water. 5) SECOND DEVELOPER Super-energetic is designed specifically to return the best sharpness and tonal range possible from a photographic support, reduces the grain size and increases the sharpness of the image. 6) FIXER Stable over time and not aggressive on the treated material, it allows to fix the material with short times but the permanence of the image in the bathroom does not alter the tones of the image. 7) WASHING Per abbreviare a pochi minuti il tempo necessario nel processo e risparmiare acqua. To shorten to a few minutes the time needed in the process and save water. 8) WETTING AGENTS Final bath that allows to obtain films and prints without halos or residues. In addition to shorten and facilitate the drying process. The complete process performed from point 1 to 8 operating at 20°C takes an average time of 20 min, the same procedure at 38 °C is performed at about 8 min. Concentrated package to dilute 1+9 to achieve a total of 10 liters and invert minimum 40 / 50 films and cards size 50x60 cm - 20x24 inch ( or equivalent area ). Configuration for 5 separate photo sessions always using new chemicals that ensure stability in the result and preservation. The chemists are separated into special light-tight sealed bottles and envelopes. This solution allows you to keep the chemistry inside the bag without any time limit and also reduces waste as the kit is composed in such a way as to fully exploit the potential of the reagents but avoiding having to store them for a long time once the baths have been prepared in solution.